· · Selected regulations checked 2026-10-13
Car roof magnet manufacturer & supplier RFQ tool
Prepare an RFQ for car roof holding magnet manufacturers. The screen organizes project details; it does not calculate holding force or approve road use.
Prepare an RFQ to compare car roof holding magnet manufacturers. The screen organizes project details; it does not calculate holding force or approve road use. The report layer explains why one canonical page covers car roof magnet for sale, car roof magnet factory, car roof magnet manufacturer, car roof magnet company, car roof magnet china, car roof magnet supplier, car roof holding magnet supplier, and car roof holding magnet pricelist intent without publishing a misleading universal price table.
Supplier scope: CoatedMagnets describes itself as a China-based coated-magnet supplier. This is an RFQ screen, not an independently audited factory directory or a vehicle-system approval. About CoatedMagnets
Start the RFQ screen
Illustrative product image; it does not show a physical holding test.
/manufacturers/car-roof-magnets. This page answers the car roof magnet supplier, holding-magnet pricelist, and for-sale wording directly instead of creating a separate near-duplicate route.Core conclusions before using a car roof holding magnet pricelist
The report layer summarizes what the tool means, where the source evidence is strong, and where public evidence is not enough for release.
Alias cluster stays canonical
`car roof magnet manufacturers`, `car roof magnet supplier`, `car roof magnet for sale`, `car roof magnet factory`, `car roof magnet company`, `car roof magnet china`, and pricelist searches are answered here instead of splitting into duplicate routes.
Pricelist needs quote context
Substrate, coating, quantity, validation scope, and assembly geometry decide whether a price list is usable.
Cargo securement is not a roof-magnet rating
49 CFR 393.102 covers cargo-securement devices and systems on commercial motor vehicles. It does not set a car-roof magnet load, safety factor, or approval test; define a project-specific validation plan instead.
Paint cure, wax dwell, horizontal-roof rule
Master Magnetics care guide (verified 2026-06-18) for flexible magnetic sheeting specifies ~90 days paint cure on new or repainted vehicles, a 48-hour wax dwell before application, weekly removal and cleaning, removal before any car wash, and an explicit warning against horizontal placement on hood or roof because of plasticizer migration risk.
Supplier route guidance
Catalog, semi-custom, and full custom lanes are separated so buyers do not compare nominal pull force alone.
Tariff and air-freight limits
A 2024 USTR notice scheduled a 25% Section 301 line for HTSUS 8505.11.00 metal permanent magnets in 2026. Check the current HTSUS treatment, exclusions, and other duties with a customs broker; air shipment also depends on current rules and carrier acceptance.
Automotive quality requirements
Ask the end customer to name the required QMS, PPAP, and traceability scope. Do not assume every vehicle-roof magnet project requires IATF 16949 certification.
Chemical and coating compliance
Applicable substance limits and disclosure duties depend on destination market, product scope, and customer requirements. Request declarations for the specified market; a certificate alone does not prove mechanical or weather durability.
Verify the protection process
Ask for the substrate coating stack, rubber compound, adhesion process, and agreed corrosion and peel tests. Do not assume one plating or molding method is suitable for every assembly.
What a car roof holding magnet pricelist must include
Use this section when the searcher expects a price list. It shows which fields must be fixed before supplier prices are comparable.
| Price driver | Quote impact | RFQ proof to send | Pricelist boundary |
|---|---|---|---|
| Magnet and base geometry | Diameter, height, pot style, thread, countersink, rubber face, and contact footprint change tooling and unit economics. | Drawing, roof-contact footprint, magnet count, target holding direction. | A generic car roof holding magnet pricelist is not reliable if geometry is still open. |
| Coating and paint protection | Rubber thickness, adhesive, corrosion protection, edge finish, and marking requirements shift material and process cost. | Coating preference, paint sensitivity, cleaning process, sample acceptance criteria. | Bare pull-force pricing can understate paint-damage and wear risk. |
| Vehicle validation responsibility | Supplier quote changes when they must support real-roof contact checks, vibration review, wind-area screening, cargo-style acceleration cues, or redundant retention. | Roof photos, speed, frontal area, mass, route type, retention fallback, and pass/fail test owner. | Validation work is usually not visible in a commodity price list. |
| Quantity, packing, and sample stage | Prototype quantity, MOQ, cartons, labels, separators, and inspection steps drive the difference between sample price and production price. | Sample quantity, annual forecast, packing method, inspection level. | A price without quantity break and packing scope is not comparable. |
| Electronics or roof-light scope | Lighting, wiring, waterproofing, housing, color-use review, FMVSS 108 impairment review, and compliance boundaries move the job beyond a magnet-only quote. | Electrical load, housing drawing, waterproof target, legal-use context. | Do not treat roof-light assemblies as a simple holding magnet pricelist item. |
| Quality and compliance documentation | Customer-specific PPAP, FMEA, traceability, and material declarations can add engineering and audit scope. | Required QMS and PPAP level, destination market, applicable declarations, and named release owner. | State the required evidence and acceptance criteria; do not infer them from an ISO or IATF label alone. |
| Rubber coating process and pre-plating | The coating stack, rubber compound, thickness tolerance, bonding method, and process ownership affect tooling, quote scope, and durability qualification. | Pre-plating spec, rubber material (e.g., TPV vs NBR), thickness tolerance, and whether coating is in-house or outsourced. | A quote that omits the stack and acceptance test leaves corrosion, adhesion, and air-gap performance unspecified. |
What the research changes in the RFQ
Each source below is paired with what it can establish, what remains uncertain, and the evidence to request from a supplier. Recheck time-sensitive rules before quoting.
| Evidence gate | Source and date | Verified point | RFQ action | Limit |
|---|---|---|---|---|
| Dynamic load cue | eCFR 49 CFR 393.102, checked 2026-10-13 | This regulation sets performance criteria for devices that secure cargo to or in commercial motor vehicles. Those cargo rules do not establish a roof-magnet load or release criterion. | Ask the project engineer and supplier to define a vehicle-specific retention test plan and acceptance owner. | Do not borrow its cargo acceleration or working-load figures as a roof-magnet design requirement. |
| Lighting and roof equipment | eCFR 49 CFR 571.108 S6.2.1 and 49 CFR 393.11, checked 2026-10-13 | Additional lamps or equipment must not impair required lighting; commercial vehicles must meet applicable FMVSS No. 108 lighting requirements. | For roof lights or beacons, separate magnetic retention pricing from lighting/color-use and wiring review. | Legal use still depends on vehicle class, state/local rules, color, and actual installation. |
| Pull-force evidence | K&J Magnetics pull-force testing notes, last updated 03/16/2026, plus steel-thickness article updated 01/02/2025; checked 2026-10-13 | Published pull values are benchmark-style measurements on big, flat, thick steel with near-zero gap; thin steel, paint, coating, or air gap reduces transfer. | Request roof-contact photos, air-gap notes, and sample pull checks on the actual roof or a representative steel coupon. | Nominal pull force does not validate curved vehicle roofs, shear loading, vibration, wind leverage, or paint care. |
| Vehicle surface care | Master Magnetics vehicle flexible-material care guide, reviewed 2026-06-13 | The guide calls for about 90 days paint cure on new/repainted vehicles, removal before car wash, weekly removal/cleaning, and cautions against horizontal hood/roof placement for flexible sheeting. | Add paint-cure, cleaning, removal, car-wash exclusion, and horizontal-use assumptions to the quote notes. | This is flexible sheeting guidance; rubber-coated neodymium bases still need project-specific paint and wear validation. |
| Adhesive fallback timing | 3M VHB 5952 technical data sheet, last revision September 2024 | 3M states about 50% ultimate bond strength after 20 minutes, 90% after 24 hours, and 100% after 72 hours at room temperature; minimum suggested application temperature for the 5952 family is 50°F (10°C). | If adhesive is proposed as backup retention, price process dwell time, surface preparation, and temporary restraint separately. | Adhesive fallback is not instant release proof and is not interchangeable with removable magnetic attachment. |
Source-backed RFQ evidence reviewed 2026-10-13
Research baseline reviewed 2026-06-25; selected regulations checked 2026-10-13. Source dates and scope limits are shown below; recheck time-sensitive rules and supplier-specific requirements when quoting.
| Gate | Source (verified) | Verified point | RFQ action | Limit |
|---|---|---|---|---|
| FMVSS 108 impairment (verified) | eCFR 49 CFR 571.108 S6.2.1, checked 2026-10-13 | S6.2.1 prohibits additional lamps, reflective devices, or other vehicle equipment that impairs lighting required by the standard. Whether an installation impairs required lighting depends on the actual setup. | For roof lights, beacons, or illuminated housings, separate magnetic retention pricing from FMVSS 108 impairment review, color/function review, and state/local use review. | Federal impairment is one gate among several; vehicle class, jurisdiction, color, and actual installation still drive legal use. |
| Steel-thickness derating (verified) | K&J Magnetics steel-thickness article + Plate Thickness Calculator, reviewed 2026-06-18 | For a D84 disc (1/2" dia × 1/4" thick) with listed Pull Force Case 1 of 10.88 lb on thick steel, K&J reports that 24-gauge steel (0.0239") drops the pull force to ~4.86 lb (~45% of Case 1). The steel is saturated below ~0.073" thickness. | Send roof gauge or representative coupon thickness; require sample pull test on actual roof steel, not catalog thick-plate data. | Specific derating values vary by magnet geometry; the D84 example is a benchmark, not a universal curve. |
| Vehicle roof contact surface (project-specific) | Vehicle OEM repair information or measured representative coupon | The roof material, thickness, curvature, paint, repairs, wrap, and contact footprint vary by vehicle and installation. A generic gauge range is not a substitute for the target vehicle data or a representative coupon. | Identify the vehicle and contact area; provide OEM repair information or measure a representative coupon, then test the finished assembly on that surface. | No universal car-roof thickness or magnetic derating factor is asserted here. |
| Shear vs normal force (verified) | Walmag Magnetics "Holding vs friction force" technical article; K&J Magnetics "Leverage & friction" article | Normal pull is measured perpendicular to the surface; sliding resistance depends on the exact surface, coating, load direction, and contact conditions. K&J publishes one model-specific bare-versus-rubber-coated comparison, which is not a universal conversion ratio. | Request normal-pull and sliding/shear results for the specified assembly and contact surface when those directions matter. | Do not estimate shear capacity from a universal friction percentage or a different magnet model. |
| Magnet grade selection (verified) | K&J Magnetics specs + Stanford Magnets N35-N54 grade chart, reviewed 2026-06-18 | Published N35, N42, and N52 values are typical grade ranges, not a production specification. Maximum operating temperature and magnetic properties depend on the exact material and manufacturer; use the quoted grade datasheet. | Ask for the complete grade, manufacturer datasheet, and maximum operating temperature; compare these with the measured or modeled assembly temperature. | A temperature suffix alone does not identify alloy chemistry or determine export-control scope; ask the exporter to classify the specific item. |
| Coating and corrosion qualification (supplier-specific) | Q-Lab ASTM B117 standard reference and the supplier’s test report for the quoted assembly | Salt-spray results depend on the tested specimen, coating process, edges, thickness, test duration, and failure criterion. A generic hour value cannot establish service life for a finished roof assembly. | Specify the exposure, exact coating stack, test method, sample, duration, and pass/fail criterion; request results for the quoted design. | ASTM B117 is a laboratory test and does not predict a universal outdoor service life or approve vehicle use. |
| China rare-earth export controls (checked 2026-10-13) | MOFCOM/GACC Announcement 2025 No. 18; MOFCOM Announcements 2025 No. 61 and No. 70 | The April 2025 No. 18 announcement controls specified medium/heavy rare-earth items and products. The October 2025 No. 61 expansion, including defined foreign-made items with at least 0.1% by value of listed China-origin items, was suspended by No. 70 through 2026-11-10. As reviewed 2026-10-13, do not apply the suspended 0.1% expansion as a current rule. | Ask the exporter and customs broker whether the specific grade, product code, origin, and route fall within the April 2025 controls. Recheck the suspension status after 2026-11-10; do not add a generic licensing buffer. | This is not a product classification or legal determination. License scope is item-specific, and measures may change after the stated suspension date. |
| NYC taxi and for-hire roof rules (checked 2026-10-13) | NYC TLC Rules, Chapters 58 and 59; current book updated February 27, 2026 | Chapter 58 §58-34(a) requires a taximeter-controlled roof light on taxicabs. Chapter 59 §59B-29(e)(2) says the Commission will not approve rooftop advertising on For-Hire Vehicles except Street Hail Liveries. | Before quoting a NYC roof-sign program, confirm vehicle class (taxicab, SHL, FHV, livery) and request the operating authority's roof-equipment and advertising rules in writing. | These are NYC rules only; check the current requirements for each vehicle class and operating market. |
| US Section 301 tariff schedule (2026 line) | USTR final Section 301 modifications notice and Federal Register notice, published September 18, 2024 | The 2024 notice scheduled a 25% Section 301 line in 2026 for HTSUS 8505.11.00 metal permanent magnets. | Check the current HTSUS treatment, product exclusions, other duties, and final-assembly classification with a customs broker before quoting landed cost. | The notice is a scheduled tariff reference, not a current landed-cost total or classification of a finished roof assembly. |
| Air freight magnetic-material acceptance | 49 CFR 173.21(d); check the current IATA DGR and carrier acceptance for the shipment | US hazardous-material rules include a magnetic-field threshold for aircraft carriage. Current IATA/ICAO packing instructions and carrier requirements determine the rest of the shipment conditions. | Before booking, give the forwarder a package-level test report and ask it to confirm the current classification, packing instructions, and carrier acceptance. | Do not apply an older PHMSA interpretation or a different package’s result as approval for the current shipment. |
| Automotive quality standard (IATF 16949) | IATF supplier QMS development interpretation and OEM customer-specific requirements; reviewed 2026-10-13 | IATF guidance uses a risk-based supplier QMS development path; ISO 9001 may be an initial minimum level unless the customer authorizes otherwise. Requirements for IATF certification, PPAP, and FMEA depend on supplier eligibility, customer requirements, and the contract. | Ask the end customer to specify the required QMS, PPAP level, FMEA deliverables, and traceability before requesting a quote. | This does not establish that every vehicle-roof magnet or aftermarket assembly needs IATF 16949 certification. |
| Chemical compliance (RoHS & REACH) | European Commission RoHS scope and ECHA REACH article duties; reviewed 2026-10-13 | RoHS restricts specified substances in in-scope electrical and electronic equipment. REACH duties depend on the substance, product, market, and supplier role; there is no blanket worldwide rule that every magnet and coating must be free of all listed substances. | Name the destination market and product scope, then request the applicable material declarations and evidence required by the customer or importer. | A supplier certificate covers only its stated scope and evidence; it does not prove mechanical, UV, salt, or wear durability. |
| Rubber coating and corrosion qualification | Project-specific supplier process declaration and qualification plan | A rubber cover alone does not document the corrosion protection or adhesion performance of the finished assembly. Plating stack, rubber compound, molding method, thickness tolerance, and environmental exposure are supplier- and design-specific. | Request the coating stack, process ownership, thickness tolerance, and agreed corrosion and peel-test method for the quoted design. | This is an RFQ checklist, not independent evidence that one plating or molding process is universally required or sufficient. |
| Wholesale MOQ and price volatility (verified) | SMM PrNd alloy pricing trends (2025-2026) and Alibaba Trade Assurance sourcing guidance; reviewed 2026-06-23 | Wholesale prices can change with material, geometry, coating, quantity, and validation scope. A low quote by itself does not establish a fake grade or skipped process step; catalog and custom minimums vary by supplier. | Compare the same drawing and acceptance criteria, request a material and process declaration, and define inspection and payment protections in the purchase terms. | Platform badges like "Verified Supplier" confirm business registration, not product quality or highway safety. |
| Aerodynamic drag scaling (verified) | NASA Glenn drag equation reference (D = Cd × A × 0.5 × ρ × V²); reviewed 2026-06-25 | Aerodynamic drag force scales with the square of speed and depends on frontal area, body shape, inclination, and drag coefficient. A roof sign cannot be released from static mass alone. | Do not size magnets based on static mass alone. Require the supplier to factor in maximum route speed, sign frontal area, and shape coefficient. | Formula gives an estimate; turbulent roof airflow interactions often require wind tunnel or CFD validation for highway speeds. |
| Summer roof temperatures (verified) | NWS vehicle heat guidance and the exact magnet manufacturer datasheet | A parked vehicle can heat in sun, but this source does not establish the temperature of a particular roof or magnet. Compare measured or modeled assembly temperature with the rating in the exact magnet datasheet. | Ask for the exact grade datasheet and agree on a measured or modeled temperature envelope for the complete assembly. | NWS vehicle guidance does not provide a roof-surface measurement or select a magnet grade. |
| ISO 11154 roof load testing (verified) | ISO 11154 international standard for roof load carriers; reviewed 2026-06-25 | ISO 11154 covers roof load carriers such as roof racks and explicitly excludes temporary magnetic or suction attachments. It is useful as a warning that roof loads have crash and detachment risk, not as a certification shortcut for magnetic-only bases. | For heavy magnetic roof assemblies, ask the manufacturer to state whether they can provide a project-specific crash or emergency-stop validation plan, redundant retention, or a mechanical fallback. | Do not claim ISO 11154 compliance for a magnetic-only car roof magnet unless a qualified lab confirms the exact assembly and attachment method are in scope. |
| Nearby electronics and sensors (project-specific) | Vehicle/OEM instructions for affected sensors or antennas; applicable radio-equipment requirements | If the assembly is near vehicle electronics, sensors, antennas, or a magnetometer, evaluate placement against the relevant device and vehicle instructions. | Ask the vehicle or device owner to specify the applicable clearance and test conditions before the layout is released. | A generic pull-force result or RF equipment authorization does not establish compatibility with a specific vehicle sensor. |
| Contact gap and paint protection (project-specific) | K&J Magnetics pull-force testing notes and the quoted assembly drawing | An added gap changes pull force, but the effect depends on magnet geometry and the complete contact stack. Paint, wrap, repair coatings, pads, and rubber thickness are not a universal 4-6 mil allowance. | Describe the real paint or wrap condition and all interface layers; request a pull and sliding test using the quoted assembly and representative surface. | Do not apply a generic force-reduction percentage or paint-thickness assumption to a vehicle roof. |
| Neodymium brittleness and impact shatter (verified) | General NdFeB material properties and handling safety guidelines; reviewed 2026-06-25 | Sintered NdFeB magnets are ceramic-like and highly brittle. A hard impact (like dropping a roof sign onto concrete or magnets snapping together) can shatter the internal core, launching sharp metallic fragments even if rubber-coated. | Require impact-resistant casing or thick rubber bumpers for heavy assemblies, and include handling/installation warnings in the product manual. | Rubber coatings reduce minor impact shock and protect paint, but do not make sintered neodymium unbreakable under severe impact. |
| Supplier identity and production scope | Supplier business registration, production evidence, and contract scope | A marketplace verification badge does not by itself establish that the seller makes the quoted item, controls each process, or has validated the finished roof assembly. | Ask who manufactures the quoted item, which processes are subcontracted, who owns inspection and corrective action, and what evidence supports those answers. | A registration record or remote factory tour does not verify product quality or road-use safety. |
| Third-party inspection scope | Buyer-defined inspection plan and the inspection provider’s calibrated methods | Inspection methods depend on the agreed acceptance criteria. Visual, dimensional, coating, magnetic, and finished-assembly checks answer different questions and should be listed separately. | Name the sample, calibrated method, measurement points, tolerance, AQL or other acceptance rule, report format, and release owner in the purchase plan. | No single instrument or inspection package is a universal approval method for a roof-mounted assembly. |
| Grade | (BH)max | Br | Max op temp | Use note |
|---|---|---|---|---|
| N35 | 33-36 MGOe | 1170-1210 mT (~11.7-12.1 kG) | 80°C / 176°F | Baseline cost-effective grade for cool, low-load contact. Not recommended for sun-baked roof or housing assemblies. |
| N42 | 43-46 MGOe | 1280-1320 mT (~12.8-13.2 kG) | 80°C / 176°F | Common balance of cost and strength; reasonable starting point for shaded, low-profile roof assemblies. |
| N52 | 49-52 MGOe | up to ~14,800 G (~1480 mT) | 80°C / 176°F | Use when magnet count or footprint is constrained. Loses strength rapidly above 80°C; not a sun-roof grade. |
| N42SH / N35UH | 33-46 MGOe (grade-dependent) | Grade-dependent; lower than same-number N grade | SH 150°C / UH 180°C | Example temperature suffixes only; confirm the exact manufacturer rating, finished-assembly temperature, and exporter classification. |
| Coating | Evidence to request | Design question |
|---|---|---|
| Zinc (Zn) plating | Declared plating and thickness; test on the quoted part | Check corrosion exposure, edges, and any overcoat in the finished design. |
| Nickel-Copper-Nickel (Ni-Cu-Ni) | Layer stack, thickness, adhesion, and agreed corrosion criterion | Assess hard contact against paint and the actual removal/cleaning routine. |
| Epoxy (black or gray) | Formulation, thickness tolerance, adhesion, and weathering scope | Confirm wear, UV, and edge damage risks for the specific contact. |
| Parylene C / PTFE | Exact coating process, coverage, adhesion, and assembly-level test report | Do not infer durability or price from the coating name alone. |
| Rubber-coated (TPV/Silicone/NBR) | Compound, hardness, cover thickness, bond/process, and surface tests | The cover can change friction, contact gap, paint wear, and pull force. |
| Roof context | Typical gauge | Thickness | Example result (D84 only) | RFQ implication |
|---|---|---|---|---|
| Unspecified vehicle roof | Unknown until confirmed | Use OEM data or measure a representative coupon | One K&J D84 example changes from 10.88 lb on thick steel to about 4.86 lb on 24 ga steel. | That model-specific example is not a roof estimate; request data for the target contact surface and exact magnet. |
| Aluminum, glass, composite, vinyl-wrapped | n/a | n/a | No magnetic return path; tool returns blocked status | Switch to clamp, rail, adhesive, or bonded steel-interface quote. |
Catalog, semi-custom, or full custom manufacturer?
Use this comparison after the tool result. It prevents one common RFQ failure: asking every supplier for a bigger magnet when the real issue is vehicle validation.
| Supplier lane | Best when | Evidence to request | Main risk |
|---|---|---|---|
| Catalog car roof magnet manufacturer | Flat steel roof, low frontal area, known coating, standard pot or rubber-coated base, and no regulatory or wiring scope. | Catalog pull-force data, coating sheet, sample photos, packing method. | Weak if the buyer only has a generic “holding magnet” phrase and no vehicle details. |
| Semi-custom OEM manufacturer | Rubber face, stud, insert, bracket, magnet count, label, or packing must change but the architecture is still familiar. | Drawing, roof-contact map, sample test notes, removal and cleaning instruction. | MOQ and lead time rise once rubber geometry, hardware, or fixture work changes. |
| Full custom car-roof holding system | Large sign, light box, electronic housing, high-speed route, curved roof, or redundant retention must be validated. | Prototype plan, dynamic test scope, wiring/compliance boundary, fallback retention method. | A magnet-only quote can underprice the work and hide safety, legal, and paint-damage exposure. |
| Trading Company / Reseller | Low MOQ, mixed SKU bundling, or when prioritizing English communication over strict technical control. | Third-party inspection report, platform escrow, clear AQL limits. | An intermediary may add cost or outsource process steps; verify who owns manufacturing, inspection, and corrective action for the quoted item. |
Known, unknown, and pending items before price comparison
These are the decision boundaries that prevent the page from pretending a universal public pricelist exists.
| Buyer question | Current answer | Why it matters | Minimum executable path |
|---|---|---|---|
| Can a public fixed pricelist be used? | No reliable public cross-vehicle data found. | The decisive variables are hidden in the vehicle and use case: roof material, roof curvature, paint condition, wind area, speed, cleaning routine, and who owns validation. | Use the tool result to request sample price, production breakpoints, fixture/tooling cost, packing cost, and validation scope as separate line items. |
| Can catalog pull force be converted into highway approval? | Unconfirmed / no reliable public universal conversion. | Pull force is commonly measured normal to a flat steel plate, while a roof assembly sees shear, vibration, air gap, dirt, wind leverage, and user removal cycles. | Require supplier sample tests on the actual roof path or a documented surrogate; do not release by catalog pull value alone. |
| Can a magnetic route work on aluminum or glass roofs? | Generally blocked unless a steel interface is added. | Non-ferrous and non-metallic substrates do not provide the magnetic return path assumed by catalog magnet data. | Price clamp, rail, adhesive, suction, or bonded steel-interface alternatives before asking for a holding magnet price. |
| Can a roof-light quote be treated as a magnet-only SKU? | No, not when the assembly includes lighting or wiring. | FMVSS 108 and commercial-vehicle lamp rules introduce lighting visibility, impairment, color/function, mounting, and wiring questions. | Split the quote into magnet base, housing, electrical, weatherproofing, legal-use review, and fallback retention. |
Data sources, use, and limits
Each source is used for a narrow purpose. The page avoids pretending that generic public references certify every roof magnet design.
eCFR 49 CFR 393.102 performance criteria
Use: Defines cargo-securement criteria for covered commercial motor vehicles. The page cites it to clarify scope, not to set a roof-magnet load requirement.
Boundary: Do not reuse its cargo acceleration or working-load values as a roof-magnet test threshold.
eCFR 49 CFR 571.108 and 49 CFR 393.11 lighting rules
Use: Frames why magnetic roof lights, beacons, and illuminated housings need lighting/color-use review beyond holding performance. Checked 2026-10-13.
Boundary: Vehicle lighting legality depends on vehicle class, jurisdiction, color, mounting, function, and use case.
Master Magnetics vehicle sign care guidance
Use: Supports paint-cure, removal-before-wash, cleaning, and horizontal-placement cautions for flexible magnetic vehicle sheeting.
Boundary: Flexible sheeting guidance is not a full rubber-coated neodymium mount release method; care instructions still vary by manufacturer, paint condition, and coating design.
K&J Magnetics pull-force testing notes
Use: Explains that published pull-force values use stated test conditions and do not validate a different roof assembly. Last updated 03/16/2026.
Boundary: Does not cover roof curvature, shear load, vibration, wind area, coatings, or paint damage.
K&J Magnetics steel-thickness article
Use: Shows how steel thickness can change a magnet test result; it does not supply a universal roof derating factor. Last updated 01/02/2025.
Boundary: Does not convert catalog pull force into a highway release threshold for roof-mounted assemblies.
Armstrong Magnetics custom magnet RFQ fields
Use: Supports requiring material, grade, drawing or dimensions, magnetization direction, coating, and quantity before comparing custom magnet prices.
Boundary: This is a general custom-magnet RFQ reference, not a car-roof holding-system validation method.
K&J Magnetics custom neodymium magnet limits
Use: Supports the page boundary that custom magnet pricing depends on shape, size, grade, purchase minimum, and lead-time constraints.
Boundary: Stock and custom magnet pricing references do not cover vehicle roof curvature, paint care, or wind-loaded assemblies.
3M VHB Tape 5952 technical data sheet
Use: Supports adhesive fallback limits: bond strength builds over time and reaches the stated 20 min / 24 h / 72 h milestones at room temperature.
Boundary: Adhesive process data applies only if the buyer is considering bonded backup retention or a bonded steel interface.
eCFR 49 CFR 571.108 S6.2.1 (verified 2026-06-18)
Use: Primary-source text: "No additional lamp, reflective device, or other motor vehicle equipment is permitted to be installed that impairs the effectiveness of lighting equipment required by this standard." Supports the FMVSS 108 impairment gate for roof lights and beacons. Current as of 6/11/2026.
Boundary: Federal impairment is one gate; state and local rules still drive actual legal use per vehicle class and color.
K&J Magnetics steel-thickness article and Plate Thickness Calculator (verified 2026-06-18)
Use: D84 disc benchmark: 10.88 lb Pull Force Case 1 on thick steel drops to ~4.86 lb on 24-gauge (0.0239") steel, ~45% of catalog value. Supports the page steel-gauge derating gate.
Boundary: Specific derating values vary by magnet size and geometry; the D84 example is a benchmark, not a universal curve.
Walmag Magnetics: holding vs friction force article (verified 2026-06-18)
Use: Explains why normal holding force and sliding resistance are separate quantities; the page uses it to require testing relevant to the contact surface.
Boundary: Friction depends on surface finish, contamination, temperature, and rubber compound; project-specific test required.
K&J Magnetics leverage and friction article (verified 2026-06-18)
Use: Rubber-coated DC6TP-N52 has ~50% of the pull force of the equivalent bare DC6-N52 (~29.7 lb), but higher friction. Supports the rubber-coated tradeoff in the page alternatives section.
Boundary: Specific ratio depends on rubber thickness, magnet geometry, and the underlying steel; benchmark, not universal.
Stanford Magnets N35-N54 grade comparison (verified 2026-06-18)
Use: Provides grade-by-grade (BH)max, Br, Hc, Hci, and max operating temperature for N35 through N54. Supports the page magnet-grade selection table.
Boundary: Values are typical ranges from a single distributor; request a supplier-specific spec sheet for production quotes.
Q-Lab ASTM B117 standard reference (verified 2026-06-18)
Use: Reference for the ASTM B117 neutral salt-spray test method; use a supplier report for the exact sample, process, duration, and failure criterion.
Boundary: A laboratory test duration is not a universal service-life prediction for a roof assembly.
MOFCOM/GACC Announcement 2025 No. 18 on specified rare-earth items (checked 2026-10-13)
Use: Primary source for the April 2025 export controls on specified medium/heavy rare-earth items and related products.
Boundary: The notice applies to its listed items and scope; it does not establish that every neodymium grade or finished magnet needs a license.
MOFCOM Notice 2025 No. 70 suspending specified October 2025 measures through 2026-11-10 (checked 2026-10-13)
Use: Primary source confirming that Announcements 2025 Nos. 55-58, 61, and 62 were suspended through 2026-11-10; this includes the October No. 61 expansion described above.
Boundary: The suspension has an end date. Recheck the official status and product scope after 2026-11-10.
NYC TLC Rules, Chapter 59 (updated February 27, 2026)
Use: §59B-29(e)(2) says the Commission will not approve rooftop advertising on For-Hire Vehicles except Street Hail Liveries.
Boundary: This rule is specific to New York City For-Hire Vehicles and does not classify a vehicle in another market.
NYC TLC Rules, Chapter 58 (current rule book)
Use: §58-34(a) requires taxicabs to have a roof light controlled by the taximeter.
Boundary: This is a taxicab requirement; it does not establish approval for an aftermarket roof light or magnet mount.
Internal RFQ screening model
Use: Uses selected roof, assembly, supplier, and quote-stage options to suggest a sourcing lane, then passes entered project values into an RFQ brief.
Boundary: It calculates no magnetic load or safety margin and does not establish price readiness or road-use approval.
USTR Section 301 tariff modification notice published in 2024
Use: The notice scheduled a 25% Section 301 line in 2026 for HTSUS 8505.11.00 metal permanent magnets. This is a tariff-screening reference, not a current landed-cost determination.
Boundary: Does not classify finished car-roof assemblies or non-metal magnets. Tariffs depend on final HTS classification and change frequently; consult a customs broker.
49 CFR 173.21(d) — US HMR for magnetized material in aircraft transport
Use: The US HMR includes a magnetic-field threshold for aircraft carriage. Check the shipment test and carrier requirements for each booking; this regulation does not replace carrier acceptance.
Boundary: Do not treat an older PHMSA interpretation or a test result for another package as approval for the current shipment.
IATA Dangerous Goods Regulations (current edition)
Use: The current controlled air-cargo rule set and carrier instructions govern magnetized-material packing and acceptance.
Boundary: Confirm the current edition and package-specific acceptance with the freight forwarder before promising air shipment.
IATF supplier QMS development and OEM customer-specific requirements (reviewed 2026-10-13)
Use: Supports checking the OEM or customer contract for supplier quality-system, PPAP, FMEA, and traceability requirements instead of assuming one certification level for every vehicle-roof magnet.
Boundary: The customer-specific requirements page does not determine the quality-system level for a particular magnet or aftermarket project.
European Commission RoHS Directive scope (reviewed 2026-10-13)
Use: RoHS restricts specified substances in electrical and electronic equipment within the Directive scope; check whether the finished product falls within that scope.
Boundary: RoHS scope does not automatically cover every standalone magnet; it does not assess mechanical, UV, salt, or wear durability.
ECHA REACH communication in the supply chain for candidate-list substances in articles (reviewed 2026-10-13)
Use: Explains REACH communication duties for articles containing candidate-list substances above the applicable threshold.
Boundary: REACH obligations depend on substance status, concentration, product, and the actor’s role; this page is not a blanket product compliance determination.
B2B sourcing platform (Alibaba) Trade Assurance guidelines (verified 2026-06-23)
Use: Supports the mitigation strategy against "fake grade" and "low price trap" risks when buying wholesale magnets for sale. Recommends holding payment in escrow and using third-party inspections.
Boundary: Platform "Verified" status checks business registration, not the specific safety of a car roof magnet assembly.
SMM (Shanghai Metals Market) PrNd Alloy Price Index (verified 2026-06-23)
Use: Supports the warning that wholesale pricing is volatile and tied to raw rare earth (PrNd) costs, invalidating fixed universal pricelists.
Boundary: Raw material indices do not cover the added costs of TPV rubber injection, assembly, and vehicle validation.
Aerodynamic drag principles and vehicle roof airflow (verified 2026-06-25)
Use: Supports the requirement to size magnets for dynamic wind load, which scales with the square of speed (v²), rather than just the static weight of the sign.
Boundary: Provides theoretical force; real-world turbulent flow on a specific car roof shape requires physical testing.
Vehicle heat guidance and magnet grade limits (verified 2026-06-25)
Use: Supports treating sun-exposed roof assemblies as heat-soak risks instead of assuming standard N-grade magnets remain below their maximum operating temperature.
Boundary: The NWS reference is vehicle heat guidance, not a roof-metal surface test. Buyers still need project-specific temperature assumptions or measurement.
ISO 11154:2023 Road vehicles — Roof load carriers (verified 2026-06-25)
Use: Shows that roof load carriers are treated as a safety-critical detachment risk and that temporary magnetic or suction attachments are outside this standard scope.
Boundary: Use it as an exclusion and risk-boundary reference only; it does not certify magnetic-only roof signs or light boxes.
Antenna grounding and sensor interference basics (verified 2026-06-25)
Use: Supports separating RF/electronic authorization review from the magnet-holding quote when the roof assembly includes electronics or sits near vehicle antennas and sensors.
Boundary: Does not prove a specific magnetic base is interference-free. Placement and RF/electronic compliance are device- and vehicle-specific.
Magnet pull force testing under stated contact conditions
Use: Supports testing the exact contact stack rather than applying a generic paint-gap or pull-force derating.
Boundary: A benchmark result does not predict the force of a different magnet, surface, coating, or finished assembly.
NdFeB material brittleness and handling safety (verified 2026-06-25)
Use: Supports the mechanical impact risk gate. Explains that sintered neodymium behaves like a brittle ceramic, not like structural steel.
Boundary: Does not quantify the exact drop-height failure point, which depends on the housing, rubber compound, and sign mass.
Third-party inspection provider’s published methods
Use: A provider’s published services can be compared with the buyer’s product-specific inspection criteria.
Boundary: A general service description does not establish that a provider has the equipment or scope required for a particular project.
What to price when the magnetic route is not the release path
A pricelist request sometimes uncovers that a magnetic base is not the right first quote. These alternatives give buyers a practical branch instead of a dead end.
Works when: Verified steel roof, removable use, low profile, clean contact, and user accepts removal/cleaning rules.
Tradeoff: Fast deployment and reusable positioning, but sensitive to air gap, dirt, paint cure, curvature, and wind leverage.
Price signal: Best for catalog or semi-custom price comparison after roof-contact assumptions are fixed.
Works when: Roof is aluminum/composite, the payload is tall, or retention must not depend on paint-contact friction.
Tradeoff: More hardware and installation work, but the release path can be made less dependent on magnetic pull force.
Price signal: Quote as mechanical assembly, not as a magnet pricelist item.
Works when: Permanent or semi-permanent installation is acceptable and surface-prep/dwell-time process can be controlled.
Tradeoff: Can create a magnetic return or backup path, but adds cure time, surface prep, removal damage risk, and process QA.
Price signal: Price tape/adhesive, primers, dwell time, and inspection separately from the magnet.
Works when: The current assembly fails because wind area or leverage is too high, not because the supplier lacks a larger magnet.
Tradeoff: Requires design change, but can reduce load faster than increasing magnet count.
Price signal: Request redesign estimate before production price breaks.
Suitable and unsuitable buyer situations
The page is useful only when it says who should not use a magnetic roof path. These limits belong in the RFQ before suppliers quote.
The buyer needs a manufacturer lane before sending RFQ.
Roof substrate, speed, mass, and frontal area are known.
The project can still change coating, magnet count, or retention architecture.
The roof is aluminum, glass, composite, wrapped, or recently painted.
The request only compares nominal pull force on lab steel.
The product is a roof light or electronic housing without legal-use review.
Per-market roof-equipment rules to verify before quoting
Roof-sign and roof-light programs often hit a regulatory wall before they hit a magnet wall. These lanes make the per-market check explicit before tooling.
| Jurisdiction | Applies to | Verified roof rule | Next step |
|---|---|---|---|
| New York City (TLC) | Taxicabs, Street Hail Liveries, For-Hire Vehicles | Chapter 58 §58-34(a) requires a taximeter-controlled roof light on taxicabs. Chapter 59 §59B-29(e)(2) says the Commission will not approve rooftop advertising on For-Hire Vehicles except Street Hail Liveries. | Confirm vehicle class and operating authority before quoting a roof-sign program in NYC. |
| US federal (FMVSS 108 / NHTSA) | All on-road motor vehicles | 49 CFR 571.108 S6.2.1 prohibits additional lamps or equipment that impair required lighting. NHTSA interprets impairment case-by-case; civil penalties apply per violation. | For roof lights or beacons, separate retention pricing from impairment and color/function review. |
| US federal (FMCSA / cargo) | Commercial motor vehicles | 49 CFR 393.102 covers cargo-securement systems. It does not set a roof-magnet retention criterion; check 49 CFR 393.11 and other applicable rules only for the specific vehicle and accessory. | Keep cargo securement requirements separate from the project-specific test plan for an exterior roof attachment. |
| Other jurisdictions (verify locally) | Taxis, ride-hail, delivery, emergency, decorative | London TfL, California CPUC, Chicago BACP, Seattle FAS, Texas DMV, and many other authorities have separate roof-equipment, color, lighting, and advertising rules. Most US states also regulate vehicle lighting color and flashing patterns. | List every operating market in the RFQ and request a per-market rule check before tooling. |
Risks, triggers, and mitigation
The biggest sourcing mistakes are not vocabulary mistakes. They are cases where the RFQ hides use conditions that determine the manufacturer lane.
Trigger: Buyer asks for “strong car roof holding magnet” without roof material or speed.
Mitigation: Stop catalog comparison and require substrate, frontal area, mass, route speed, dynamic screening assumptions, and cleaning process.
Trigger: Supplier quotes a low MOQ catalog magnet while the project needs rubber face, bracket, or packing changes.
Mitigation: Classify the lane before quote comparison and request sample scope, not only unit price.
Trigger: Aluminum, glass, composite, wrapped, dirty, or recently painted roof is treated like flat lab steel.
Mitigation: Move to clamp, rail, adhesive, suction, or steel-interface review unless the roof path is verified.
Trigger: Roof light or beacon projects focus only on magnet pull force.
Mitigation: Add lighting, wiring, color-use, waterproofing, and redundant retention checks to the RFQ.
Trigger: A supplier treats eCFR cargo criteria, K&J pull-force data, or flexible-sheeting care instructions as direct approval for a finished roof assembly.
Mitigation: Cite each source for its narrow use only, then require project-specific sample testing and release ownership in the RFQ.
Trigger: Supplier quotes EXW or FOB China price without stating air freight feasibility or US tariff impact.
Mitigation: For US buyers, recheck current HTS classification and Section 301 treatment with a customs broker. For air samples, request field-strength evidence and carrier acceptance; choose the freight mode from the shipment and carrier requirements.
Trigger: Buyer selects a "car roof magnet for sale" wholesale listing solely because it is substantially cheaper than comparable quotes.
Mitigation: Price alone does not prove a grade or process problem. Match the drawing and acceptance criteria, request grade and coating declarations, and define independent inspection where the project risk warrants it.
Three example RFQ decisions
These illustrative scenarios use hypothetical inputs to show how the screen routes a request. They are not customer cases, physical tests, holding-force calculations, product approvals, or release decisions.
Taxi roof sign, NYC fleet
Inputs: Curved steel roof (22 ga), 1.4 kg sign, 0.10 m² frontal area, 65 mph, 4 rubber-coated N42 magnets, daily removal.
Decision: Tool lane: semi-custom manufacturer review because the roof is curved and the assembly is a sign. The buyer still needs to check the current NYC vehicle-class rules and agree on roof-contact, surface-care, and validation evidence; the screen does not select a magnet grade.
Large advertising frame, highway route
Inputs: Flat steel roof (20 ga), 5.0 kg frame, 0.45 m² frontal area, 75 mph, 6 magnets; supplier need selected as full custom.
Decision: Tool lane: full custom manufacturer review based on the selected supplier need. The large exposed assembly needs its own engineering and validation plan; this screen cannot determine whether the magnet count is sufficient or prescribe a backup design.
Magnetic roof light, summer deployment
Inputs: Curved steel roof (22 ga), 2.2 kg LED beacon, 0.06 m² frontal area, 70 mph, 4 magnets; assembly selected as light box.
Decision: Tool lane: full custom manufacturer review because the assembly includes a light box. Quote retention, electrical and enclosure scope separately, then check lighting rules and agree on validation for the destination market.
Car roof magnet manufacturer & supplier FAQ
Direct answers for buyers who searched the alias phrase or need a procurement-ready next step.
This page treats the plural manufacturers phrase as an alias of the canonical car roof magnet manufacturer page. Supplier, factory, China, for-sale, and pricelist wording stays on this one route because buyers need the same RFQ scope and validation boundaries.
No. Public evidence is not enough to publish a universal price across different roof materials, magnet geometry, coatings, quantities, and validation scope. Use the price drivers and send suppliers one matching RFQ.
No. Published pull force is a test result under stated contact conditions; it does not by itself account for roof curvature, steel thickness, gaps, shear, wind, vibration, paint care, or the finished assembly. Ask for the test method and project-specific validation.
A catalog quote is a starting point when the roof material and contact area are known, the assembly fits an existing product, and the buyer can accept the published coating, geometry, packaging, and documentation. Confirm fit and test scope before release.
Use a custom lane when the assembly needs a new housing or bracket, includes lighting or electronics, requires a different retention interface, or needs supplier engineering and vehicle-specific validation.
No. It only organizes entered values into a sourcing lane and RFQ brief. It calculates no holding force or safety margin and does not approve a design for road use.
Send roof material and photos, contact footprint, assembly drawing and mass, frontal area, design speed, magnet specification, coating, sample quantity, annual volume, packaging, destination market, acceptance criteria, and who owns validation and release.
Do not assume a direct magnetic attachment. Ask for a separate steel interface, clamp, rail, adhesive, or other retention concept, then validate that finished design for the vehicle and use case.
Dirt, trapped moisture, paint condition, and removal frequency can affect vehicle-surface damage. The linked Master Magnetics guide addresses flexible magnetic vehicle sheeting; its care directions, including the horizontal hood or roof caution, should not be treated as a complete care specification for every rubber-coated neodymium mount.
Do not treat it as instant backup retention. The 3M VHB 5952 data sheet describes bond strength building over time under stated conditions. If adhesive is part of the design, agree on surface preparation, application temperature, dwell, and validation for the actual assembly.
Yes. Separate the retention quote from electrical, enclosure, lighting, color-use, and destination-market review. In the United States, FMVSS 108 includes a limit on additional equipment that impairs required lighting; the final installation and vehicle context matter.
Send the displayed project envelope and RFQ fields to two suppliers. Ask them to return the same quote scope and propose a sample validation plan with named pass/fail criteria before production release.
There is no single public cross-vehicle holding threshold that approves all car roof magnet assemblies. Roof, payload, contact, route, and validation assumptions must be set for each project.
It can materially change a result. K&J publishes a D84 example that measures about 10.88 lb on thick steel and about 4.86 lb on 24-gauge steel. Treat that as one magnet-specific example, not a universal derating factor or a road-use value.
Normal pull is perpendicular to the contact surface; shear is sliding resistance along it. Friction, rubber, surface finish, contamination, and geometry change the relationship, so request the relevant test data for the chosen assembly rather than applying a universal conversion.
Specify the complete grade and temperature rating from the supplier datasheet, plus dimensions, magnetization direction, and acceptance test. Operating limits depend on the exact grade and design; do not choose a grade from a generic summer-temperature rule alone.
Ask suppliers to state the complete coating stack, substrate preparation, rubber compound if used, thickness tolerance, and corrosion/adhesion test method. Salt-spray hours are comparative test results, not a direct service-life prediction.
The October 2025 expansion was suspended through 2026-11-10 under MOFCOM Notice 2025 No. 70; specified April 2025 controls under No. 18 remain a separate scope. As reviewed 2026-10-13, ask the exporter and customs broker to confirm the quoted item against current rules, then recheck after the suspension date.
The standard prohibits additional lamps, reflective devices, or other equipment that impairs required lighting. A roof-light project also needs the applicable vehicle-class, color/function, and jurisdiction review; a magnet quote does not answer those questions.
A USTR notice scheduled a 25% Section 301 rate in 2026 for HTSUS 8505.11.00 metal permanent magnets. Recheck the current rate, exclusions, and classification at import; a finished roof assembly may be classified differently, so confirm with a customs broker.
Possibly, if the shipment meets applicable magnetic-field and dangerous-goods rules and the carrier accepts it. Request current field-strength evidence, packaging details, and carrier confirmation before promising an air shipment.
No universal rule is established here. Ask the end customer to specify the required quality system, PPAP level, FMEA deliverables, and traceability. IATF supplier-development guidance is risk-based and includes customer-specific requirements.
The obligations depend on destination market, product scope, substance status, and the supplier or importer role. Identify the requirements that apply to the finished product and request the corresponding material declarations; do not treat a generic certificate as proof of mechanical durability.
Ask which production and coating steps are done in-house or subcontracted, who controls inspection and corrective action, and what records support the quoted test criteria. Verify those claims against the sample and purchase specification rather than relying on a company label or platform badge.
Request a car roof magnet supplier review
Include roof material, assembly mass, frontal area, design speed, magnet count, coating, and whether you found this page through the car roof magnet company, car roof magnet supplier, car roof holding magnet supplier, or pricelist alias.
